Rising energy costs are leading more homeowners to upgrade to energy-efficient tankless water heater installation solutions. At Eager Plumbing, we install high-performance tankless water heaters that provide reliable hot water, low energy consumption, and a space-saving design.
Whether you’re replacing an outdated traditional tank system or upgrading during a renovation, our team can help you choose the right solution for your home. With long-term energy savings, improved efficiency, and on-demand hot water, now is the perfect time to invest in a professionally installed tankless water heater.
Let’s take a closer look at why tankless heaters are such an appealing option.
Reasons To Switch To A Tankless Water Heater System
Whether it’s a new installation or a water heater replacement, here are five reasons to consider going tankless:
1) Limitless Hot Water
Tankless units take in cold water, heat it to the set temperature as it passes through the unit, and deliver hot water as needed. Unlike tank water heaters that store a limited amount, tankless water heaters keep delivering. You won’t run out of hot water even if your household takes back-to-back showers. The only caveat is making sure you install the right size unit for your requirements.
2) Extreme Energy Efficiency
Tankless units use energy smartly by warming only the water you need, when you need it. There is little room for energy waste in the way they operate. Traditional units heat an entire tank of water that sits cooling and reheating between uses, using significantly more energy than necessary.
3) Space Saving Design
Tankless units are wall-mounted and take up a fraction of the space that a traditional tank heater does. Thanks to their neat, compact design, they easily fit into a closet, utility room, or basement, with room to spare. Size is dependent on the usage requirements. They range from 10-18” H x 7-14” wide, with a depth of 10 inches for small units, to 24-30” H x 20-25” W x 8-10” D for a whole-household unit.
4) Built For Endurance
Tankless water heaters are built to last for many years, often up to 20 years or longer. This is significantly higher than the 10 -15 year life expectancy for a tank heater.
5) Reduced Risk Of Water Damage
Using a tankless heater avoids the need for a large, pressurized tank that corrodes over time and may burst, causing flooding and property damage. Some units have built-in leak detection and an auto shut-off feature to prevent mishaps.
Gas Or Electric? How To Choose The Right Tankless Water Heater
While you’ll feel the benefits of going tankless with both types of units, there are factors which may make one type more suited to your situation than the other. If you’re not sure what will work best for you, speak to our team. With over 30 years of combined experience in serving the Kerrville, TX community, they’ll help you make the right choice for your situation. Keep in mind factors such as:
- Installation: Electrical units are cheaper and easier to install. Gas units are more complicated to install, and the installation costs are higher.
- Flow Rate: Electrical units offer limited flow rates, while gas units have a higher flow rate and can provide adequate water for high-demand, simultaneous usage.
Sizing Considerations For Texas’s Temperature Extremes
Selecting the right size water heater is key to keeping the hot water flowing. A unit that is too small won’t manage high-demand periods, while an overly large unit can push up your power bill. To find the sweet spot, your plumber will consider factors such as:
- The size of your household
- How many bathrooms will be drawing hot water?
- When is the most hot water used?
- How many appliances need hot water?
They’ll use these details to work out the ideal size water heater for your needs.
What To Expect During The Installation Process
These are the typical stages to the tankless water heater installation process:
Assessment & Planning
A plumber will assess your current system and note the average hot water demand. They’ll check the available gas or power supply, as well as find the right area for the new installation.
Recommendations & System Upgrades
Our team will recommend options that would work for your household. They’ll also discuss any upgrades to the existing infrastructure that need to happen before installing the tankless system to make sure it can run safely.
Gas units may require:
- Bigger gas line to provide the flow rate that the water heater needs.
- Installation of a suitable venting system
- New gas regulators are sometimes necessary
Electric units may need:
- Increased electrical capacity
- Dedicated water heater circuit breaker
- Heavy-duty wiring
Old Unit Removal
The existing tank is drained, disconnected from the power and water supply, and removed. The area is cleaned and prepped for the new installation.
Installation Of The Tankless System
The new water heater is installed. It is usually mounted on a wall near existing plumbing lines, with due care to provide proper clearance and accessibility for future maintenance.
Plumbing & Connections
The plumbing team connects hot and cold water lines, installs a shut-off valve, a pressure relief valve, and a service valve kit to allow for future descaling. Depending on the site, extra fittings or insulation may be added, and some pipes may be rerouted to reach the unit.
Installation Of Venting
Gas systems have an additional step. A new vent pipe is installed that leads potentially harmful gas emissions away from the unit to outside. The vent is sealed to prevent leaks.
Connection & Testing
Gas lines are connected and pressure-tested for compliance and safety. Electrical water heaters have wiring installed and connected to the panel. Once it’s all connected, they’ll test for leaks, make sure the water flow and pressure are consistent, and set the temperature.
Client Walkthrough
You’ll be shown how to adjust the temperature. The plumber will run you through any basic maintenance tasks you’ll need to perform, and discuss the warranty details with you. They’ll answer any questions you may have about your new water heating system.
Texas Code Considerations
For Water Heater Installations
Our plumbers follow the regulations regarding water heaters set out by the State of Texas for safe water heater installation. These standards cover the materials used, the safe design of the unit, as well as installation.
Frequently Asked Tankless Water Heater Installation Questions
How Long Does Tankless Water Heater Installation Take?
Professional tankless water heater installation typically takes 4-8 hours, depending on your home’s existing plumbing configuration and any necessary modifications. Our technicians work efficiently while maintaining strict quality standards, ensuring your new system is properly installed and tested before we consider the job complete.
What Size Tankless Water Heater Do I Need for My Home?
Determining the correct size for your tankless water heater installation depends on your household’s peak hot water demand and the temperature rise required in your area. Our experienced technicians calculate these factors during our initial assessment, recommending the appropriate unit size to ensure an adequate hot water supply for your family’s needs without oversizing the system.
Schedule Professional Tankless Water Heater Installation In Kerrville TX
Eager Plumbing has over 30 years of combined plumbing experience and we are ready to help you upgrade to an energy-efficient tankless water heater with professional installation and dependable service. Our skilled plumbers use the latest tools and industry expertise to ensure a smooth transition with minimal disruption to your home.
Call us at (830) 999-PIPE to schedule your tankless water heater installation today.